Audio Hungary P200

The P200 is a versatile power amplifier, built on KT120, KT150, or KT170 tubes and Audio Hungary’s latest transformer designs. The P200 features Audio Hungary’s sophisticated Automatic Bias Control System for the four power tubes. It ensures the smallest possible output voltage noise while guaranteeing the highest degree of linearity of the output stage. It also prevents the sensitive, high permeability transformer cores from saturating by precisely equalizing the quiescent currents of the power tubes. Finally, the bias system has a built-in soft-start function too, which prevents the tubes from drawing excessive current during start-up and eliminates pops and noises during power-up. The above means that no further adjustment is required once the electron tubes supplied with the unit have been installed, the circuit automatically takes care of everything.

The amp has two distinct modes of operation, STEREO and BRIDGE mode. You can change the operating mode by reconfiguring the output connections, then use a STEREO INPUT /BRIDGE INPUT selector switch to select the input source for the chosen operation mode.

In STEREO mode the P200 can be used as a conventional stereo power amplifier which has two unbalanced outputs for 4 or 8 Ohm speakers, with a maximum available output power of 2 x 100 W. In this mode you can connect an UNBALANCED or BALANCED stereo signal source to the amplifier.

In BRIDGE mode the P200 can be used as a monoblock power amplifier with a BALANCED input. In this mode you can concentrate the total output power of the P200 into a single channel: the two channels of P200 are fed from a monaural, symmetrical audio signal (BRIDGE input), and a single 8 Ohm loudspeaker can be connected between the two amplifier outputs, bridging the output terminals. The maximum available bridged, monaural output power is 1 x 200 W.

Specifications

Stereo Mode

• Rated output power: 2 x 100 W
• Input impedance, Balanced Stereo IN: 40 kOhm
• Input impedance, Unbalanced Stereo IN: 10 kOhm
• Input sensitivity, Balanced Stereo IN: 480 mV, to rated output
• Input sensitivity, Unbalanced Stereo IN: 480 mV, to rated output
• Gain: +35.4 dB (RL = 8 Ohm)
• Frequency response: 18 Hz to 60 kHz (-3 dB, rated output)
• Total Harmonic Distortion: < 1.2% (f = 1 kHz, rated output)
• Signal-to-noise ratio: > 100 dB (RL = 8 Ohm, rated output)
• Load impedance: 4 or 8 Ohm

Bridge Mode

• Rated output power: 1 x 200 W
• Input impedance, Bridge IN: 20 kOhm
• Input sensitivity, Bridge IN: 1V, to rated output
• Gain: +32 dB (RL = 8 Ohm)
• Frequency response: 20 Hz to 55 kHz (-3 dB, rated output)
• Total Harmonic Distortion: < 2% (f = 1 kHz, rated output)
• Signal-to-noise ratio: > 100 dB (RL = 8 Ohm, rated output)
• Load impedance: 8 Ohm

General

Number of input ports / channel: 1 unbalanced Stereo IN

• 1 balanced Stereo IN
• 1 balanced Bridge IN

Number of output ports / channel: 1 unbalanced Power OUT

Tubes required

• 4 x KT120 (KT150 or KT170 optionally)
• 2 x 6922
• 2 x 12AX7

Weight: 26 kg
Dimensions: W:43 x H:21 x L:46 cm
Power requirement: 720 W

Users Manual